TTC 100

TTC 100 is a powerful electronic solution for the off-highway industry that relies on its equipment to function under the most difficult conditions. 

TTC 100 was designed to comply with the IEC 61508 international standard, SIL 2 (Safety Integrity Level).  It is part of a complete and compatible product family and is protected by a robust housing suited to the off-highway industry.

Features

  • MPC 555, 40 MHz, 448 kB int. Flash, 26 kB int. RAM, 512 kB ext. RAM, 2 MB ext. Flash
  • 16 kbit EEPROM
  • Watchdog CPU Freescale HC 908, including monitoring software
  • 1 x TTP bus with redundant channels
  • TTP communication controller AS 8202 NF
  • 1 x RS-232 and 1 x LIN serial interfaces
  • 2 x CAN, 125 to 500 kbit/s
  • 8 x analog IN 0 to 5 V or 4 to 20 mA / 10 bit, configured by software
  • 12 x analog / digital IN 0 to 10 V / 10 bit
  • 8 x digital IN (counter 10 Hz to 10 kHz)
  • 5 x digital IN for hardware identification
  • 4 x digital OUT 2.35 A, PWM, current control loop, short to ground protection and open load detection
  • 4 x digital OUT 4 A, PWM, short to ground protection and open load detection
  • 4 x digital OUT 4 A, short to ground protection and open load detection
  • 1 x digital OUT 15 A, short to ground protection and open load detection (1 x with wind screen wiper option)
  • Internal: monitoring of board temperature, sensor supply and battery
  • 1 x sensor supply 10.5 V
  • 2 x sensor supply 5 V
  • Software: I/O Toolbox, Simulink®, C/C++, CoDeSys® 2.3

Data Sheets:

cervis_ttcontrol-ttc_100-datasheet.pdf
cervis_ttcontrol-software-flyer-e_1.pdf