TTC 200
TTC 200 is a powerful electronic solution for the off-highway industry that relies on its equipment to function under the most difficult conditions.
TTC 200 was designed to comply with the IEC 61508 international standard. The stand-alone version and the network version with TTP® fulfill SIL 2 (Safety Integrity Level) and SIL 3 requirements respectively. It is part of a complete and compatible product family and is protected by a robust housing suited to the off-highway industry.
Features
- MPC 555, 40 MHz, 448 kB int. Flash, 26 kB int. RAM,
- 512 kB ext. RAM (opt. 1 MB ext. RAM), 2 MB ext. Flash

- 16 kbit EEPROM
- Watchdog CPU Freescale HC 908, including monitoring software
- 1 x TTP bus with redundant channels
- TTP communication controller AS 8202 NF
- 1 x RS-232 and 1 x LIN serial interfaces
- 2 x CAN, 125 to 500 kbit/s
- 8 x analog IN 0 to 5 V or 4 to 20 mA / 10 bit, configured by software
- 12 x analog / digital IN 0 to 10 V / 10 bit
- 8 x digital IN (counter 10 Hz to 10 kHz)
- 5 x digital IN for TTP encoding number for hardware identification
- 8 x digital OUT 2.35 A, PWM, current control loop, short to ground protection and open load detection
- 4 x digital OUT 4 A, PWM, short to ground protection and open load detection
- 16 x digital OUT 4 A, short to ground protection and open load detection
- 3 x digital OUT 15 A, short to ground protection and open load detection (1 x with wind screen wiper option)
- 3 x digital OUT for external relays to switch off output for safely applications (fail-silent)
- 2 x analog OUT, 0.2 to 0.8 Vbat
- Internal: monitoring of board temperature, sensor supply and battery
- 1 x sensor supply 10.5 V
- 2 x sensor supply 5 V
- Safety: modular safety concept for distributed and stand-alone systems
- Software: TTPMatlink, Simulink®, C/C++, CoDeSys® 2.3
Data Sheets:
cervis_ttcontrol-ttc_200-datasheet_1.pdf
cervis_ttcontrol-ttc_200-flyer_1.pdf
cervis_ttcontrol-software-flyer-e_1.pdf
